Scan Tool Output Control | Additional Menu Selection(s) | Description | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Coolant Gauge Sweep Test | IPC Gauges | The IPC drives the coolant gauge at or above 260°F (125°C) when you select Up. The IPC drives the coolant gauge at or below 140°F (60°C) when you select Down. | ||||||||||||||
Fuel Gauge Sweep Test | IPC Gauges | The IPC drives the fuel gauge at or above full when you select Up. The IPC drives the fuel gauge at or below empty when you select Down. | ||||||||||||||
Oil Gauge Sweep Test | IPC Gauges | The IPC drives the engine oil pressure gauge at or above H when you select Up. The IPC drives the engine oil pressure gauge at or below L when you select Down. | ||||||||||||||
Speed Gauge Sweep Test | IPC Gauges | The IPC drives the speedometer at or above 120 MPH (200 km/h) (base) or 140 MPH (220 km/h) (uplevel) when you select Up. The IPC drives the speedometer at or below 0 MPH (0 km/h) when you select Down. | ||||||||||||||
Tach Gauge Sweep Test | IPC Gauges | The IPC drives the tachometer at or above 7000 RPM when you select Up. The IPC drives the tachometer at or below 0 RPM when you select Down. | ||||||||||||||
Volts Gauge Sweep Test | IPC Gauges | The IPC drives the volt gauge at or above 18 volts when you select Up. The IPC drives the volt gauge at or below 8 volts when you select Down. | ||||||||||||||
Lamp Test | -- | The IPC illuminates the following indicators when you select On:
The indicators should illuminate until commanded Off. | ||||||||||||||
1st | PRNDL Display | The IPC illuminates the 1st gear position (1) on the IPC when you select On. The 1st gear position should illuminate until commanded Off. | ||||||||||||||
2nd | PRNDL Display | The IPC illuminates the 2nd gear position (2) on the IPC when you select On. The 2nd gear position should illuminate until commanded Off. | ||||||||||||||
3rd | PRNDL Display | The IPC illuminates the 3rd gear position (3) on the IPC when you select On. The 3rd gear position should illuminate until commanded Off. | ||||||||||||||
Drive | PRNDL Display | The IPC illuminates the drive position (D) on the IPC when you select On. The drive position should illuminate until commanded Off. | ||||||||||||||
Neutral | PRNDL Display | The IPC illuminates the neutral position (N) on the IPC when you select On. The neutral position should illuminate until commanded Off. | ||||||||||||||
Park | PRNDL Display | The IPC illuminates the park position (P) on the IPC when you select On. The park position should illuminate until commanded Off. | ||||||||||||||
Reverse | PRNDL Display | The IPC illuminates the reverse position (R) on the IPC when you select On. The reverse position should illuminate until commanded Off. |
