Keyless Entry Functions
| • | Remote driver door unlock: The driver's door unlock when pressing
the unlock button on the keyless entry transmitter. |
| • | Remote all door unlock: All doors unlock when pressing twice (or
more) the unlock button on the keyless entry transmitter. |
| • | Remote all door lock: All doors lock when pressing the lock button
on the keyless entry transmitter. |
| • | Rear compartment lid release: The rear compartment lid opens when
pressing the rear compartment button on the keyless entry transmitter. |
| • | Remote activation verification: The headlamps flashes and/or the
horn sounds when using the keyless entry transmitter. |
| • | Remote alarm: The headlamps flashes and the horn sounds alternately
for two minutes when pressing the alarm button on the keyless entry transmitter.
Pressing the alarm button again within two minutes stops the remote
alarm. |
Remote Driver Door Unlock
The RCDLR sends a message to the BCM through the keyless entry communication
link circuit to unlocks the driver's door upon pressing once the unlock
button on the keyless entry transmitter.
Remote All Door Unlock
The RCDLR sends a message to the BCM through the keyless entry communication
link circuit to unlock all doors upon pressing twice (no more than 5 seconds
between presses) the unlock button on the keyless entry transmitter.
Remote All Door Lock
The RCDLR sends a message to the BCM through the keyless entry communication
link circuit to lock all doors upon pressing twice the lock button on the
keyless entry transmitter. However, the automatic door locks controls
door locking as follows:
| • | The BCM will not lock the doors when the lockout prevention feature
is active. |
| • | The BCM delays door locking when the last door closed locking
feature is active. |
Remote Alarm
When pressing the panic button on the keyless entry transmitter, the
RCDLR send a message to the BCM on the keyless entry communication link to
flash the headlamps and sound the horn alternately for two minutes. The
BCM switches ground on and off to the horn relay control circuit. The horn
relay will turn on an off making the horns turn on and off. The BCM also
switches ground on and off to the headlamp relay control circuit. The Headlamp
relay will turn on and off making the headlamps turn on and off.
Rear Compartment Lid Release
When pressing the rear compartment button on the keyless entry transmitter,
the RCDLR sends a message to the BCM on the keyless entry communication link.
The BCM supplies voltage to the rear compartment lid lock release actuator
feed circuit, which energizes the rear compartment lid lock release actuator,
releasing the rear compartment lid.
If the transaxle is shifted out of PARK, voltage supply to the rear
compartment lid release actuator feed circuit is interrupted. This action
disables the rear compartment lid release feature.
