Rear Door Opening Weatherstrip Replacement Impala

1. Open the rear door.
2. Remove the carpet retainers. Refer to Rear Carpet Retainer Replacement in Interior Trim.
3. Remove the rear quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement in Interior Trim.
4. Remove the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement in Interior Trim.
5. Remove the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement in Interior Trim.
6. Remove the center lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement in Interior Trim.
7. Remove the rear door opening weatherstrip by pulling it off the pinchweld flange.

1. Position the rear door opening weatherstrip to the pinchweld flange.

Starting at the center of the rocker panel area and moving in a clockwise direction press the rear door opening weatherstrip to the pinchweld flange until fully seated.

Important: The joint butt ends must have no gap and be located in the center of the of the rocker panel area.

2. Install joint butt ends together.
3. Install the rear quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement in Interior Trim.
4. Install the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement in Interior Trim.
5. Install the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement in Interior Trim.
6. Install the center lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement in Interior Trim.
7. Install the carpet retainers. Refer to Rear Carpet Retainer Replacement in Interior Trim.
8. Close the rear door.