GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Monte Carlo 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Cushion Cover Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .

    2. Object Number: 521066 Size: SH
  2. Remove the hog rings from the rear seat cushion cover.

    3. Object Number: 519886 Size: SH
  3. Reach inside of the rear seat cushion cover in order to unfasten the hook and the loop retainers securing the rear seat cushion cover to the pad.

    4. Object Number: 521082 Size: SH
  4. Remove the rear seat cushion cover from the pad.

Installation Procedure

    Object Number: 520582 Size: SH
  1. Position the rear seat cushion cover to the pad.

    2. Object Number: 520583 Size: SH
  2. Align the alignment marks on the rear seat cushion cover to the alignment marks on the pad.

    3. Object Number: 520586 Size: SH
  3. Pull the rear seat cushion cover over the pad and aline the hook and the loop retainers.

    4. Object Number: 520580 Size: SH
  4. Pull the rear seat cushion cover over the pad and pull over and under the edge.

    5. Object Number: 521048 Size: SH
  5. Use firm hand pressure in order to fasten the hook and the loop retainers, securing the rear seat cushion cover to the pad.

    6. Object Number: 520578 Size: SH
  6. Align the alignment marks on the rear seat cushion cover to the alignment marks on the pad, on the back side.

    7. Object Number: 520576 Size: SH
  7. Install the hog rings to the rear seat cushion cover.
  8. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .