Passenger Compartment Air Filter Replacement for Chevrolet Monte Carlo 2000

Passenger Compartment Air Filter Replacement If Equipped

1. Position the windshield wipers in the UP position, by keying the ignition OFF when the wiper reach the desired position.
2. Raise the hood.
3. Position aside the rear hood seal halfway to the center. Refer to Hood Rear Seal Replacement in Body Front End.
4. Remove the right air inlet grill. Refer to Air Inlet Grille Panel Replacement In Body Front End.



5. Remove the passenger compartment air filter.

1. Install the passenger compartment air filter.
2. Install the air inlet grill. Refer to Air Inlet Grille Panel Replacement in Body Front End.
3. Install the rear hood seal. Refer to Hood Rear Seal Replacement in Body Front End.
4. Close the hood.
5. Return the windshield wipers to the PARK position.