Tools Required
J 33049
Camshaft Bearing Service Set
- Assemble the
J 33049
according to the manufacturer's instructions.
Notice: Severe engine damage may result if the oil holes are not
correctly aligned.
- Install the camshaft bearings in the following order:
2.1. | Index the camshaft bearing oil holes with the engine block oil passages. |
2.2. | Place the bearing on the
J 33049
. |
2.3. | Install the third camshaft bearing. |
2.4. | Install the second camshaft bearing. |
2.5. | Install the outer camshaft bearings. |
- Apply sealer GM P/N 12377901 (Canadian P/N 10953504)
or the equivalent to the camshaft rear bearing hole plug.
- Install the camshaft rear bearing hole plug.