GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 38778 Door Trim Pad Clip Remover

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Use J 38778 to remove the push-in retainers holding the engine splash shield to the lower flange of the engine compartment side rail.

  3. Object Number: 456715  Size: SH
  4. For the Impala, remove the front fender liner. Refer to Front Fender Liner Replacement .

  5. Object Number: 456714  Size: SH
  6. Remove the engine splash shield from the lower flange of the engine compartment side rail.

Installation Procedure


    Object Number: 456714  Size: SH
  1. Install the engine splash shield to the lower flange of the engine compartment side rail.
  2. Align the holes in the engine splash shield to the holes in the outboard side engine compartment side rail.
  3. Insert the push-in retainers to the engine splash shield.
  4. For the Impala, install the front fender liner. Refer to Front Fender Liner Replacement .
  5. Lower the vehicle.