Tools Required
• | J 36995
Balance Shaft
Bearing Remover/Installer |
- Dip the balance shaft bushing
in clean engine oil.
Important: The
J 36995
installs the balance shaft bushing to the correct depth. The balance
shaft bushing is properly installed when
J 36995
fully contacts the balance shaft bore or the engine block/transaxle
mounting flange.
- Use the balance shaft bushing installers to install the balance shaft
bushing.
- Remove
J 36995
.
- Dip the balance shaft bearing into clean
engine oil.
- Use
J 21465-13
and
J 36995
to install the balance shaft
bearing into the engine block.