Checks
| Action
|
DEFINITION: Engine cranks OK, but does not start for a long time. Does eventually
run, or may start but immediately dies.
|
Preliminary
| Perform the
Diagnostic System Check - Engine Controls
.
|
Sensor/System
| A variety of sensor or physical conditions may result in a hard start condition
without setting a diagnostic trouble code (DTC). In order to determine if any
of these conditions exist, perform the following actions:
|
Fuel System
| A variety of fuel system conditions may result in a hard start condition
without setting a DTC. In order to determine if any of these conditions exist,
perform the following actions:
|
Ignition System
| A variety of ignition system conditions may result in a hard start condition
without setting a DTC. In order to determine if any of these conditions exist.
Refer to
Electronic Ignition (EI) System Diagnosis
.
|
Engine Mechanical
| A variety of engine mechanical conditions may result in a hard start condition
without setting a DTC. In order to determine if any of these conditions exist.
Refer to
Engine Compression Test
in Engine
Mechanical-3.8L.
If incorrect compression is detected, inspect the following items:
• | Intake/exhaust manifold flashing |
|