Accelerator Control Cable Bracket Replacement. Chevrolet Monte Carlo 2003

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2003 🢒 Monte Carlo 🢒 Engine 🢒 Engine Controls - 3.4L 🢒 Accelerator Control Cable Bracket Replacement

Removal Procedure

Remove the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
Remove the cruise control cable from the throttle body lever.
Remove the cruise control cable from the accelerator cable bracket.

Remove the accelerator cable from the throttle body lever.
Remove the accelerator cable from the accelerator cable bracket.

Remove the nut and the bolts from the accelerator cable bracket.
Remove the accelerator cable bracket.

Installation Procedure

Install the accelerator cable bracket to the throttle body.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Install the nut and the bolts to the accelerator cable bracket.

Tighten

•	Tighten the nut to 10 N·m (89 lb in).

•	Tighten the bolts to 13 N·m (115 lb in).

Install the accelerator cable to the accelerator cable bracket.
Install the accelerator cable to the throttle body lever.

Install the cruise control cable to the accelerator cable bracket.
Install the cruise control cable to the throttle body lever.
Inspect for complete throttle opening and closing positions by operating the accelerator pedal.
Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .