Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Disconnect the evaporative emission (EVAP) vent valve electrical connector (1).
- Remove the EVAP vent valve bracket bolt (3).
- Remove the vent hose (4) from the EVAP vent valve.
- Remove the EVAP vent valve from the bracket (2).
Installation Procedure
- Install the EVAP vent valve to the bracket (2).
- Install the vent hose (4) to the EVAP vent valve.
- Install the EVAP vent valve and the bracket.
Notice: Refer to Fastener Notice in the Preface section.
- Install the EVAP vent valve bracket bolt.
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Connect the EVAP vent valve electrical connector (1).
- Lower the vehicle.