GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Monte Carlo 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure

    Object Number: 156946 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the bolt from the stabilizer shaft insulator bracket (3).
  3. Remove the stabilizer shaft insulator bracket.
  4. Remove the stabilizer shaft insulator (2) from the stabilizer shaft.

Installation Procedure

    Object Number: 156946 Size: SH
  1. Install the stabilizer shaft insulator (2) to the stabilizer shaft.
  2. Install the stabilizer shaft insulator bracket (3).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer shaft bracket nuts.

    4. Tighten
    Tighten the bolts to 48 N·m (35 lb ft).

  4. Lower the vehicle.