Caution: Refer to Brake Fluid Irritant Caution in the Preface section.

Notice: Refer to Brake Fluid Effects on Paint and Electrical Components Notice in the Preface section.

1. Remove the left side instrument panel insulator.
2. Remove the left side carpet retainers. Refer to Front Carpet Retainer Replacement in Interior Trim.
3. Remove the lower center pillar trim panel on the left side. Refer to Center Pillar Lower Trim Panel Replacement in Interior Trim.
4. Fold back the carpeting in order to gain access to the parking brake cable.
5. Remove the parking brake cable from the park brake cable guides.
6. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
7. Remove the parking brake cable at the equalizer.
8. Lower the vehicle.



9. Remove the cable button end from the parking brake lever clevis.
10. Remove the front cable from the vehicle.

1. Install the front cable into the vehicle.
2. Connect the cable to the parking brake lever.
3. Install the cable button in the lever clevis.
4. Install the cable button assurance clip to the lever clevis.
5. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.



6. Tighten the nut on the equalizer in order to remove the slack in the cable.
7. Lower the vehicle.
8. Install the parking brake cable through the park brake cable guides.
9. Position the carpeting properly.
10. Install the lower center pillar trim panel on the left side. Refer to Center Pillar Lower Trim Panel Replacement in Interior Trim.
11. Install the left side carpet retainers. Refer to Front Carpet Retainer Replacement in Interior Trim.
12. Install the left side instrument panel insulator.
13. Adjust the parking brake. Refer to Park Brake Adjustment .