GM Service Manual Online
For 1990-2009 cars only

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover

Removal Procedure

  1. Remove the air inlet grille Panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.

  2. Object Number: 815219  Size: SH
  3. Using the J 38778 , remove the wiper motor water deflector push-in retainer.
  4. Remove the wiper motor water deflector from the wiper drive system module.

Installation Procedure


    Object Number: 815219  Size: SH
  1. Position the wiper motor water deflector to the wiper drive system module.
  2. Install the wiper motor water deflector push-in retainer.
  3. Install the air inlet grille Panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.