Schematic Reference: Instrument Cluster Schematics

Did you perform the Instrument Cluster Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Install a scan tool.
2. Turn the ignition ON, with the engine OFF.
3. With a scan tool, observe the Engine Oil Life Remaining parameter in the PCM Engine Data 2 data list.

Does the Engine Oil Life Remaining parameter display 0%?

Go to Step 3

System OK

Replace the IPC. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

Go to Step 4

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2