GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Monte Carlo 🢒 Body and Accessories 🢒 Body Front End 🢒 Seal Replacement - Plenum to Hood

Removal Procedure

    Object Number: 456732 Size: SH
  1. Open the hood.
  2. Remove the right side of the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  3. To remove the seal from the pinch-weld flange, start at the passenger side corner of the seal and pull forward and off of the pinch-weld flange.

Installation Procedure

    Object Number: 456732 Size: SH
  1. Align the seal to the pinch-weld flange.
  2. Press to install the seal to the pinch-weld flange, start at the passenger side corner and work toward the center of the car.
  3. Install the right side of the air inlet grille. Refer to Air Inlet Grille Panel Replacement .
  4. Close the hood.