Front Side Door Window Belt Outer Sealing Strip Replacement Impala

1. Remove the outside rearview mirror. Refer to Power Mirror Replacement .
2. Remove the rear screw from the front door outer belt sealing strip.
3. Remove the front door outer belt sealing strip.

1. Position the front door outer belt sealing strip to the front door pinch-weld flange.
2. Install the front door outer belt sealing strip to the front door pinch-weld flange pressing into place until fully seated.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the screw to the rear of the front door outer belt sealing strip.

Tighten
Tighten the outer belt sealing strip screw to 2 N·m (18 lb in).

4. Install the outside rearview mirror. Refer to Power Mirror Replacement .

Front Side Door Window Belt Outer Sealing Strip Replacement Monte Carlo

1. Remove the outside rearview mirror. Refer to Power Mirror Replacement .
2. Remove the screws from the front door outer belt sealing strip.



3. Remove the front door outer belt sealing strip.

1. Position the front door outer belt sealing strip to the front door pinch-weld flange.



2. Install the front door outer belt sealing strip to the front door pinch-weld flange pressing into place until fully seated.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




3. Install the front screw to front door outer belt sealing strip.

Tighten
Tighten the outer belt sealing strip front screw to 2 N·m (18 lb in).

4. Install the screw to the front door outer belt sealing strip.

Tighten
Tighten the outer belt sealing strip machine rear screw to 5 N·m (9 lb in).

5. Install the outside rearview mirror. Refer to Power Mirror Replacement .