Door Ajar Switches: The scan tool displays Open/Closed.
The passenger door ajar switch input to the body control module (BCM), where
an open door is displayed as Open.
Door Lock Motor: The scan tool displays Active/Inactive.
The BCM output to the door lock actuators, where Lock is displayed as Active.
Door Unlock Switch: The scan tool displays Active/Inactive.
The driver and front passenger door lock switches input to the BCM, where
a switch in the Lock or Unlock position is displayed as Active.
Door Unlock Motor: The scan tool displays Active/Inactive.
The BCM output to the passenger door lock actuators, where Unlock is displayed
as Active.
Doors Battery Fd: The scan tool displays Active/Inactive.
The state of the door lock system battery feed circuit as seen by the BCM,
where a complete circuit is displayed as Active.
Doors System Gnd: The scan tool displays Active/Inactive.
The state of the door lock system ground circuit as seen by the BCM, where
a complete circuit is displayed as Active.
Driver Door Open Sw.: The scan tool displays Open/Closed.
The driver door open switch input to the BCM, where an open door is displayed
as Open.
Drivers Door Unlock Motor: The scan tool displays On/Off.
The BCM output to the driver door lock actuator, where Unlock is displayed
as On.
Electronics Battery Fd: The scan tool displays volts.
The state of the battery voltage supplied to the BCM.
Key Cylinder Unlock: The scan tool displays On/Off.
The key cylinder unlock switch input to the BCM, where a key cylinder in the
unlock position is displayed as On.
Software Part Number: The scan tool displays the BCM
program part number. This is used to determine applicability to vehicle RPO
content.