GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Monte Carlo 🢒 Body and Accessories 🢒 Doors 🢒 Front Side Door Wiring Conduit Replacement

Front Side Door Wiring Conduit Replacement Impala

Removal Procedure

    Object Number: 319803 Size: SH
  1. Remove the right instrument panel insulator if removing the right conduit. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.
  2. Remove the door rubber conduit from where it attaches at the windshield pillar.
  3. Disconnect the body harness electrical connector from the front door wiring harness.
  4. Remove the conduit from the front door.
  5. Remove the front door wiring harness out from the rubber conduit.

Installation Procedure

    Object Number: 319803 Size: SH
  1. Install the wiring harness to the front door through the rubber conduit.
  2. Install the rubber conduit to the front door.
  3. Install the rubber conduit to the windshield pillar.
  4. Connect the front door wiring harness electrical connector to the body harness.
  5. Install the right instrument panel insulator if required. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.

Front Side Door Wiring Conduit Replacement Monte Carlo

Removal Procedure

    Object Number: 319803 Size: SH
  1. Remove the right instrument panel insulator if removing the right conduit. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.
  2. Remove the door rubber conduit from where it attaches at the windshield pillar.
  3. Disconnect the body harness electrical connector from the front door wiring harness.
  4. Remove the conduit from the front door.
  5. Remove the front door wiring harness out from the rubber conduit.

Installation Procedure

    Object Number: 319803 Size: SH
  1. Install the wiring harness to the front door through the rubber conduit.
  2. Install the rubber conduit to the front door.
  3. Install the rubber conduit to the windshield pillar.
  4. Connect the front door wiring harness to the body harness electrical connector.
  5. Install the right instrument panel insulator if required. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.