GM Service Manual Online
For 1990-2009 cars only

Rear Side Door Wiring Conduit Replacement Impala

Removal Procedure

Important: Mark the location and the color of the wires to the electrical socket before removing the wires.


    Object Number: 459522  Size: SH
  1. Remove the conduit from the center pillar.
  2. Disconnect the rear door wiring harness electrical connector from the body harness.
  3. Disconnect the wire harness retainer from the wiring harness socket.
  4. Remove the wiring harness wiring one at a time from the socket.
  5. Remove the rubber conduit from the rear door.
  6. Remove the wiring harness wiring from the rubber conduit.

Installation Procedure


    Object Number: 459522  Size: SH
  1. Install the rear door electrical harness through the rubber conduit.
  2. Install the rear door wiring harness wires to the electrical socket.
  3. Connect the rear door wiring harness electrical connector.

  4. Object Number: 459519  Size: SH
  5. Install the rubber conduit to the rear door.
  6. Install the rubber conduit to the center pillar.