GM Service Manual Online
For 1990-2009 cars only

Front Side Door Window Channel Retainer Replacement Impala

Removal Procedure


    Object Number: 631153  Size: SH
  1. Remove the outside rearview mirror. Refer to Power Mirror Replacement .
  2. Pull down the front door window channel in order to gain access to the rivets.
  3. Loosen the front door frame applique screws. Refer to Front Door Frame Applique Replacement .
  4. Drill out the rivets.
  5. Remove the front door window channel retainer from the front door.

Installation Procedure


    Object Number: 631153  Size: SH
  1. Position the front door window channel retainer to the front door.
  2. Install the window channel retainer rivets.
  3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Tighten the front door frame applique screws. Refer to Front Door Frame Applique Replacement .
  5. Install the front door window channel in position.
  6. Install the outside mirror. Refer to Power Mirror Replacement .

Front Side Door Window Channel Retainer Replacement Monte Carlo

Removal Procedure


    Object Number: 631153  Size: SH
  1. Remove the outside rearview mirror. Refer to Power Mirror Replacement .
  2. Pull down the door window channel in order to gain access to the rivets.
  3. Loosen the front door frame applique screws. Refer to Front Door Frame Applique Replacement .
  4. Remove the front door window channel retainer screw.
  5. Remove the front door window channel retainer from the front door.

Installation Procedure


    Object Number: 631153  Size: SH
  1. Position the front door window channel retainer to the front door.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the front door window channel retainer rivets.
  4. Tighten the front door frame applique screws. Refer to Front Door Frame Applique Replacement .
  5. Install the front door window weather-strip in position.
  6. Install the outside mirror. Refer to Power Mirror Replacement .