Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Position window approximately half way down in the door.
2. Remove the interior trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
4. Tape the window to door frame to prevent it from moving.
5. Remove the front door window regulator. Refer to Front Side Door Window Regulator Replacement .

1

Front Side Door Window Regulator Motor Screw (Qty: 3)

Tighten
4.6 N·m (41 lb in)

2

Front Side Door Window Regulator Motor

Tip
Disconnect the electrical connector from the window regulator motor.