GM Service Manual Online
For 1990-2009 cars only

Seat Belt Buckle Replacement - Center Front Split Bench

Removal Procedure


    Object Number: 519311  Size: SH
  1. Remove the front seat. Refer to Split Bench Seat Replacement in Seats.
  2. Important: When drilling out the rivet do not enlarge the rivet hole.

  3. Using a 6.35 mm (¼ in) drill bit, drill out the rivet that retains the front seat belt buckle to the rear of the front seat track.

  4. Object Number: 519341  Size: SH
  5. Remove the front seat belt buckle from the front seat track.

Installation Procedure


    Object Number: 519341  Size: SH
  1. Position the front seat belt buckle anchor to the front seat track.
  2. Important: The rivet is only used for installation alignment.


    Object Number: 519286  Size: SH
  3. Install the new rivet which secures the front seat belt buckle to the rear of the front seat track.
  4. Install the front seat. Refer to Split Bench Seat Replacement in Seats.