Quarter Upper Trim Panel Replacement Monte Carlo
Removal Procedure
- Remove the seat belt from
the rear upper quarter trim panel. Refer to
Rear Seat Belt Retractor Replacement
in Seat Belts.
- Remove the coat hook from the rear upper trim panel. Refer to
Coat Hook Replacement
.
- Remove the rear quarter upper trim in by disengaging the push-in
retainers.
Installation Procedure
- Align the rear quarter
upper trim panel slotted retainers to the rear quarter lower trim panel.
- Align the rear quarter upper trim panel push-in retainers to the
rear quarter inner upper panel.
- Install the rear quarter upper trim panel push-in retainers, applying
pressure to secure at all push-in retainers locations.
- Install the seat belt to the rear upper quarter trim panel. Refer
to
Rear Seat Belt Retractor Replacement
in Seat Belts.
- Install the coat hook to the rear upper quarter trim panel. Refer
to
Coat Hook Replacement
.
Quarter Upper Trim Panel Replacement Impala
Removal Procedure
- Pull down on the trim panel to disengage
the clip retainers on the roof side rail.
- Pull out to disengage the clips located at the bottom of the triangular
window.
- Slide the roof leg out from under the upper trim panel of the center pillar.
- Remove the rear quarter upper trim panel.
Installation Procedure
- Install a new dual-lock retainer to the rear quarter inner panel, if required.
- Slide the roof leg under the upper trim panel of the center pillar.
- Reposition the rear seat belt to the trim panel.
- Align the push-in retainers from the trim panel with the slots by the triangular
window.
- Install the trim panel push-in retainers by applying pressure to secure
all of the push-in retainer locations.
- Align the trim panel to the clip retainers
on the roof side rail.
- Install the trim panel by applying upward pressure to the retainer locations
until fully seated.