For 1990-2009 cars only
Removal Procedure
- Pull down on the assist handle.
- Use a small, flat-bladed tool to remove the plastic cover.
- Remove the assist strap screws (2).
- Remove the assist strap from the vehicle.
Installation Procedure
- Install the assist strap to the vehicle.
- Install the assist strap screws (2).
- Install the plastic cover. Press the cover into place until fully seated.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the screws to 2 N·m (18 lb in).
