GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2003 🢒 Monte Carlo 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Ajar Indicator Switch Replacement

Removal Procedure
  1. Open the rear compartment.
  2. Remove the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement .

    3. Object Number: 330424 Size: MH
  3. Remove the rear compartment lid ajar lamp/switch to rear compartment lid latch screw (5).
  4. Remove the compartment lid ajar lamp/switch (6) from the rear compartment lid latch (8).

Installation Procedure

    Object Number: 330424 Size: MH
  1. Position the rear compartment lid ajar lamp/switch (6) to the rear compartment lid latch (8).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the rear compartment lid ajar lamp/switch to rear compartment lid latch screw (5).

    3. Tighten
    Tighten the rear compartment lid ajar lamp/switch to rear compartment lid latch screw to 5 N·m (44 lb in).

  3. Install the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement .
  4. Close the rear compartment.