Important: The 3-way catalytic converter is serviced by replacing the entire assembly. Always replace the gaskets when servicing the 3-way catalytic converter assembly. Never install the original gaskets.
Notice: Refer to Catalytic Converter Movement Notice in the Preface section.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
• | Tighten the exhaust manifold pipe stud nuts to 35 N·m (26 lb ft). |
• | Tighten the catalytic converter nuts to 60 N·m (44 lb ft). |
Important: The 3-way catalytic converter is serviced by replacing the entire assembly. Always replace the gaskets when servicing the 3-way catalytic converter assembly. Never install the original gaskets.
Notice: To prevent internal damage to the flexible coupling of the catalytic converter assembly, the converter must be supported. The vertical movement at the rear of the catalytic converter assembly must not exceed 6 degrees up or down.
Notice: Refer to Catalytic Converter Movement Notice in the Preface section.
Notice: Refer to Fastener Notice in the Preface section.
Tighten
• | Tighten the exhaust manifold pipe stud nuts to 35 N·m (26 lb ft). |
• | Tighten the catalytic converter nuts to 60 N·m (44 lb ft). |