GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling in Engine Cooling.
  2. Remove the left spark plug wires. Refer to Spark Plug Wire Replacement in Engine Controls - 3.4L.
  3. Remove the right engine mount strut at the engine. Refer to Engine Mount Strut Replacement - Right Side .
  4. Remove the thermostat bypass hose and the pipe. Refer to Thermostat Bypass Pipes Replacement in Engine Cooling.
  5. Remove the positive crankcase ventilation (PCV) valve from the left valve rocker arm cover.

  6. Object Number: 61833  Size: SH
  7. Remove the left valve rocker arm cover bolts.
  8. Remove the left valve rocker arm cover.
  9. Remove the left valve rocker arm cover gasket.
  10. Clean the valve rocker arm cover.
  11. Clean the valve rocker arm cover gasket mating surfaces.

Installation Procedure


    Object Number: 190588  Size: SH
  1. Install a new left valve rocker arm cover gasket to the valve rocker arm cover.
  2. Apply sealant GM P/N 12346141  (Canadian P/N 10953433) or equivalent at the cylinder head to lower intake manifold joint at the rear of the lower intake manifold (1).

  3. Object Number: 190589  Size: SH
  4. Apply sealant GM P/N 12346141  (Canadian P/N 10953433) or equivalent at the cylinder head to lower intake manifold joint at the front of the lower intake manifold (1).

  5. Object Number: 61833  Size: SH
  6. Install the left valve rocker arm cover.
  7. Notice: Refer to Fastener Notice in the Preface section.

  8. Install the valve rocker arm cover bolts.
  9. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  10. Install the PCV valve to the left valve rocker arm cover.
  11. Install the thermostat bypass hose and pipe. Refer to Thermostat Bypass Pipes Replacement in Engine Cooling.
  12. Install the right engine mount strut. Refer to Engine Mount Strut Replacement - Right Side .
  13. Install the left spark plug wires. Refer to Spark Plug Wire Replacement in Engine Controls - 3.4L.
  14. Fill the cooling system. Refer to Cooling System Draining and Filling in Engine Cooling.