GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Chevrolet
🢒
2005
🢒
Monte Carlo
🢒
Accessories
🢒
Keyless Entry
🢒 Remote Control Door Lock Receiver Replacement
Removal Procedure
Remove the instrument panel (IP) upper trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement
.
Disengage the receiver retainers from the IP upper trim pad.
Disconnect the receiver electrical connector.
Remove the receiver.
Installation Procedure
Connect the electrical connector.
Engage the receiver retainers to the IP upper trim pad.
Install the IP upper trim panel. Refer to
Instrument Panel Upper Trim Panel Replacement
.
If a new remote control door lock receiver is being installed, program the transmitter. Refer to
Transmitter Programming
.
Refer to
Control Module References
for programming and setup information.