GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Monte Carlo 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Crankshaft Position Sensor Replacement

Removal Procedure

    Object Number: 1612884 Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Disconnect the crankshaft position (CKP) sensor electrical connector (4).

    3. Object Number: 1587763 Size: SH
  3. Remove the CKP sensor stud.
  4. Remove the CKP sensor.

Installation Procedure

    Object Number: 1587763 Size: SH
  1. Lubricate the CKP sensor O-ring with clean engine oil.
  2. Install the CKP sensor.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the CKP sensor stud.

    4. Tighten
    Tighten the stud to 10 N·m (89 lb in).


    Object Number: 1612884 Size: SH
  4. Connect the CKP sensor electrical connector (4).
  5. Lower the vehicle.