Emergency Vehicle Rear Compartment Lid Lamp Replacement Impala RPO T53

1. Open the rear compartment.
2. Disconnect the electrical connectors from the rear compartment lid lamp(s).
3. Disconnect the electrical connector from the flasher fuse (1).
4. Remove the flasher fuse (1) if required.



5. Remove the rear compartment lid lamp(s) from the rear compartment lid.

1. Position the rear compartment lid lamp(s) from the rear compartment lid.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




2. Install the flasher fuse (1) if required.
3. Connect the electrical connector to the flasher fuse (1).
4. Connect the electrical connectors to the rear compartment lid lamp(s).
5. Close the rear compartment.