Caution: Do not strike or jolt the inflatable restraint sensing and diagnostic module (SDM). Before applying power to the SDM, make sure that it is securely fastened with the arrow facing toward the front of the vehicle. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.

Caution: Refer to SIR Caution in the Preface section.

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
2. Remove the right front seat. Refer to Front Seat Replacement - Bucket .
3. Pull the carpeting back in order to access the sensing and diagnostic module (SDM). Refer to Floor Panel Carpet Replacement .
4. Program the inflatable restraint SDM after replacement. Refer to Control Module References .

1

Bolt/Screw, Inflatable Restraint Sensing and Diagnostic Module (Qty: 3)

Tighten
10 N·m (88 lb in)

2

Module Assembly, Inflatable Restraint Sensing and Diagnostic