GM Service Manual Online
For 1990-2009 cars only

Object Number: 1657730  Size: SF

Callout

Component Name

Caution: Refer to Brake Dust Caution in the Preface section.

Preliminary Procedures

  1. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
  2. Remove the brake caliper mounting bracket. Refer to Front Brake Caliper Bracket Replacement .

1

Retaining Screw

Notice: Refer to Fastener Notice in the Preface section.

Tighten
14 N·m (124 lb in)

2

Brake Rotor

Tip

    • If removing the rotor to service the brake system, mark the relationship of the rotor to the wheel stud for proper installation.
    • Using the J 41013 , clean the contact area of the brake rotor and the wheel bearing if the rotor is to be reused.
    • Using the J 42450-A , remove the rust and dirt from the contact area of the wheel bearing if replacing the rotor.
    • Inspect the assembled lateral runout (LRO). Refer to Brake Rotor Assembled Lateral Runout Correction .