Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the instrument panel outer trim covers. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side and Instrument Panel Outer Trim Cover Replacement - Right Side .

1

Screw, Instrument Panel Trim Plate (Qty: 4)

Tighten
2 N·m (18 lb in)

2

Plate Assembly, Instrument Panel Trim

Tip

1. Disconnect the electrical connector.
2. Tilt the steering column to the lowest position.
3. Remove the driver information center switch. Refer to Driver Information Display Switch Replacement .

3

Clip, Retainer (Qty: 8)

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the instrument panel cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .
2. Remove the right instrument panel outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side .

1

Instrument Panel Trim Plate Screws (Qty: 4)

Tighten
2 N·m (18 lb in)

2

Instrument Panel Trim Plate

3

Retainer Clips (Qty: 3)