Removal Procedure
- Remove the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement .
- Remove the rear door pull handle bracket from the rear door inner panel.
- Disconnect all of the required electrical connectors.
- Remove the inside door handle gasket.
- Remove the rear door water deflector from the rear door inner panel.
Installation Procedure
- Align the rear door water deflector to the rear door inner panel. Secure the water deflector at the corners.
- Pull the rear door wiring harness leads through the slits in the rear door water deflector.
- Install the rear door water deflector, start pressing the adhesive pattern at the bottom center and working outward and upward in order to prevent puckering.
- Install the inside door handle gasket.
- Connect all of the required electrical connectors.
- Install the rear door pull handle bracket to the rear door inner panel.
- Install the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement .