Preliminary Procedure

1. Remove the rear wheel liner bolts to the rear fascia. Refer to Rear Wheelhouse Panel Liner Replacement .
2. Remove the rear trim sill plate. Refer to Rear Compartment Sill Trim Plate Replacement .
3. Remove the license the lamp. Refer to Rear License Lamp Replacement .

1

Rear Fascia Retainer (Qty: 4)

2

Rear Fascia Retainer (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

3

Rear Fascia Bolt (Qty: 6)

Tighten
10 N·m (89 lb in)

4

Rear Fascia Top Center Nut (Qty: 4)

Tighten
10 N·m (89 lb in)

5

Rear Fascia

Tip
Disconnect the electrical connector.

Preliminary Procedure

Remove the right and left rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .

1

Rear Fascia Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Rear Fascia Bracket Screw (Qty: 4)

Tighten
6 N·m (53 lb in)

3

Rear Fascia Retainer (Qty: 4)

4

Rear Fascia

Tip
Disconnect the electrical harness connectors.