Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the HVAC module. Refer to HVAC Module Assembly Replacement .
2. Disconnect the electrical connector from the recirculation actuator.

1

Screw, Air Inlet Assembly (Qty: 3)

Tighten
1.5 N·m (13 lb in)

2

Screw, Recirculation Actuator (Qty: 2)

Tighten
1.5 N·m (13 lb in)

3

Actuator, Recirculation

4

Housing Assembly, Air Inlet