Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Position window approximately half way down in the door.
2. Remove the interior trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Tape the window to door frame to prevent it from moving.

1

Rear Side Door Window Regulator Bolts (Qty: 6)

Tighten
10 N·m (89 lb in)

2

Rear Side Door Window Regulator

Tip

1. Disconnect the electrical connector from the window regulator motor.
2. Transfer parts as necessary.