Tools Required

1. Use the J 36418-1B  (1) in order to install the four turbine shaft oil seal rings (619).
2. Resize oil seal rings (619) after installation:

2.1.	Place J 36418-2A  (2) over the turbine shaft oil seal rings (619) and seat against input housing.

2.2.	Remove J 36418-2A  (2).

2.3.	Turn J 36418-2A  (2) upside down and place over the turbine shaft oil seal ring (619).

2.4.	Seat against input housing.

2.5.	Leave J 36418-2A  (2) in place over the turbine shaft oil seal rings (619) until the reverse input clutch housing is installed.