Transmission Mount Replacement SWB LWB RHD

1. Remove the exhaust system. Refer to Exhaust System Replacement.

Important: The engine mounts must NOT bend or deflect from the vertical position, damage to the mount will occur.

2. Support the transmission with a suitable jack and a block of wood.
3. Remove the transmission support. Refer to Transmission Support Replacement.



4. Remove the transmission mount bolts.
5. Remove the transmission mount from the vehicle.

Important: The engine mounts must NOT bend or deflect from the vertical position, damage to the mount will occur.

1. Install the transmission mount to the vehicle.

Notice: Refer to Fastener Notice in the Preface section.




2. Install the transmission mount bolts.

Tighten
Tighten the bolts to 60 N·m (44 lb. ft).

3. Install the transmission support. Refer to Transmission Support Replacement.
4. Remove the support from under the transmission.
5. Install the exhaust system.
6. Lower the vehicle.