GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Omega VE 🢒 Preface 🢒 Cautions and Notices 🢒 Drive Belt Replacement

Drive Belt Replacement Without Air Conditioning

Removal Procedure
  1. Remove the air intake duct. Refer to Air Cleaner Inlet Duct Replacement.

    2. Object Number: 2010563 Size: SH
  2. Note the routing of the drive belt (1).

    3. Object Number: 2010564 Size: SH

    Important: Using a suitable tool rotate the drive belt tensioner (2) clockwise.

  3. Rotate the drive belt tensioner (2) clockwise in order to release tension on the drive belt (1).
  4. Remove the drive belt (1) from the crankshaft pulley (3).
  5. Slowly release the drive belt tensioner (2).
  6. Remove the drive belt (1).

Installation Procedure

    Object Number: 2010563 Size: SH
  1. Install and correctly route the drive belt (1) around the following:
    2. • Water pump pulley
    • Generator
    • Drive belt tensioner
    • Crankshaft balancer
    • Power steering pump

    Object Number: 2010564 Size: SH
  2. Using a suitable tool rotate the drive belt tensioner (2) clockwise.
  3. Install the drive belt (1) to the crankshaft pulley (3).

    4. Important: Make sure the drive belt (1) is correctly aligned and seated into the grooves of the accessory drive pulleys.

  4. Slowly release the drive belt tensioner (2).
  5. Remove the suitable tool from the drive belt tensioner (2).
  6. Install the air intake duct. Refer to Air Cleaner Inlet Duct Replacement.

Drive Belt Replacement With Air Condictioning

Removal Procedure
  1. Remove the air intake duct. Refer to Air Cleaner Inlet Duct Replacement.

    2. Object Number: 1957929 Size: SH
  2. Note the routing of the drive belt (1).

    3. Object Number: 1957931 Size: SH

    Important: Using a suitable tool rotate the drive belt tensioner (2) clockwise.

  3. Rotate the drive belt tensioner (2) clockwise in order to release tension on the drive belt (1).
  4. Remove the drive belt (1) from the crankshaft pulley (3).
  5. Slowly release the drive belt tensioner (2).
  6. Remove the drive belt (1).

Installation Procedure

    Object Number: 1957929 Size: SH
  1. Install and correctly route the drive belt (1) around the following:
    2. • Water pump pulley
    • Generator
    • Drive belt tensioner
    • Crankshaft balancer
    • Air conditioning compressor
    • Power steering pump

    Object Number: 1957931 Size: SH
  2. Using a suitable tool rotate the drive belt tensioner (2) clockwise.
  3. Install the drive belt (1) to the crankshaft pulley (3).

    4. Important: Make sure the drive belt (1) is correctly aligned and seated into the grooves of the accessory drive pulleys.

  4. Slowly release the drive belt tensioner (2).
  5. Remove the suitable tool from the drive belt tensioner (2).
  6. Install the air intake duct. Refer to Air Cleaner Inlet Duct Replacement.
Loading…
Loading the web debug toolbar…
Attempt #