Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the engine cover.
- Remove the breather hose, ventilation hose, and cam position sensor wiring connector from the camshaft cover.
- Remove the ignition wires from the spark plug.
- Remove the camshaft cover bolts and camshaft cover.
- Remove the camshaft cover gasket.
Installation Procedure
- Install the camshaft cover gasket on the camshaft cover.
- Position the camshaft cover on the engine block.
Notice: Refer to Fastener Notice in the Preface section.
- Install the camshaft cover bolts.
Tighten
Tighten the camshaft cover bolts to 10 N·m (89 lb ft).
- Install the ignition wires to the spark plugs and connect the breather hose, ventilation hose and cam position sensor wiring connector to the camshaft cover.
- Install the engine cover.
- Connect the negative battery cable.