GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Optra 🢒 Suspension 🢒 Rear Suspension 🢒 Stabilizer Shaft Link Replacement

Removal Procedure

    Object Number: 1290746 Size: SH
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the wheel. Refer to Tire and Wheel Removal and Installation .
  3. Remove the stabilizer shaft-to-stabilizer link nut.
  4. Remove the stabilizer link-to-strut assembly nut.
  5. Remove the stabilizer link.

Installation Procedure

    Object Number: 1290775 Size: SH
  1. Install the stabilizer link.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the stabilizer link-to-strut assembly nut.

    3. Tighten
    Tighten the stabilizer link-to-strut assembly nut to 47 N·m (35 lb ft).

  3. Install the stabilizer shaft-to-stabilizer link nut.

    4. Tighten
    Tighten the stabilizer shaft-to-stabilizer link nut to 47 N·m (35 lb ft).

  4. Install the wheel. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.