Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the rear compartment lock cover.
- Disconnect the electrical connector.
- Remove the screws and the rear compartment lock.
- Disconnect the lock rod.
Installation Procedure
- Connect the lock rod.
Notice: Refer to Fastener Notice in the Preface section.
- Install the rear compartment lock with the screws.
Tighten
Tighten the rear compartment lock screws to 6 N·m (53 lb in).
- Connect the electrical connector.
- Install the rear compartment lock cover.
- Connect the negative battery cable.