Caution: To avoid personal injury when exposed to welding flashes or to galvanized (Zinc Oxide) metal toxic fumes while grinding/cutting on any type of metal or sheet molded compound, you must work in a properly ventilated area, wearing an approved respirator, eye protection , earplugs, welding gloves, and protective clothing.
Unibody vehicles are composed of a single unit by welding together pressed parts made of steel panels. Each panel is stamped and welded to the other panels in order to form a structure. The unibody structure has the strength and the durability to perform as a body and as a frame.
Following a collision, visually inspect the entire vehicle for damage. In a collision, damage may spread beyond the point of impact.
Application | Specification | |
|---|---|---|
Metric | English | |
Overall length (f) | ||
| 4515 mm | 177.8 in |
| 4295 mm | 169.1 in |
| 4580 mm | 180.3 in |
Front overhang (g) | ||
| 885 mm | 34.8 in |
| 902 mm | 35.5 in |
| 900 mm | 35.4 in |
Rear overhang (d) | ||
| 1015 mm | 40.0 in |
| 793 mm | 31.2 in |
| 1080 mm | 42.5 in |
Overall width (c) | ||
| 1725 mm | 67.9 in |
Overall height (a) | ||
| 1445 mm | 56.9 in |
| 1460 mm | 57.5 in |
| 1500 mm | 59.1 in |
Minimum ground clearance | ||
| 160 mm | 6.3 in |
Wheelbase (e) | ||
| 2600 mm | 102.4 in |
Front and rear track (b) | ||
| 1480 mm | 58.3 in |
