Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the deposit box. Refer to
Deposit Box Replacement
in Instrument Panel, Gages, and Console.
- Remove the bolt.
- Disconnect the electrical connector.
- Remove the folding mirror switch.
Installation Procedure
- Connect the electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the folding mirror switch with the bolt.
Tighten
Tighten the daytime running lamp module bolts to
10 N·m (89 lb in).
- Install the deposit box. Refer to
Deposit Box Replacement
in Instrument Panel, Gages, and Console.
- Connect the negative battery cable.