GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Optra 🢒 Body 🢒 Exterior Trim 🢒 Center Pillar Applique Replacement

Removal Procedure

    Object Number: 1308985 Size: SH
  1. Remove the outside channel molding. Refer to Outer Belt Sealing Strip Replacement .
  2. Position the weatherstrip in order to access the screws.
  3. Remove the screws and the center pillar molding.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1308985 Size: SH
  1. Install the screws and the center pillar molding.

    2. Tighten
    Tighten the center pillar molding screws to 1.3 N·m (12 lb in).

  2. Install the weatherstrip to its original position.
  3. Install the outside channel molding. Refer to Outer Belt Sealing Strip Replacement .