Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Diagnostic System Check-Instrument Panel? | -- | Go to Step 2 | |
2 | With a fused jumper wire, Connect terminals 4 and 5 of the fuel pump connector together. Did the Low Fuel Indicator turn on? | -- | Go to Step 7 | Go to Step 3 |
3 | Using a multimeter test terminal 4 of the fuel pump connector for continuity to ground. Refer to Testing for Continuity Is ground present? | -- | Go to Step 4 | Go to Step 5 |
4 | Using a multimeter test for continuity between terminal 5 of the fuel pump connector and terminal B14 of the Instrument cluster. Refer to Testing for Continuity Is continuity present? | -- | Go to Step 8 | Go to Step 6 |
5 | Repair the open in ground circuit between terminal 4 of the fuel pump and ground 302. Refer to Wiring Repairs Did you find and complete the repair? | -- | Go to Step 9 | -- |
6 | Repair the open in signal circuit between terminal 5 of the fuel pump connector and terminal B14 of the Instrument cluster. Refer to Wiring Repairs Did you find and complete the repair? | -- | Go to Step 9 | -- |
7 | Replace the Fuel Pump assembly. Refer to 1.4L Fuel Pump Replacement , 1.6L Fuel Pump Replacement , 1.8L Fuel Pump Replacement , 2.0L Fuel Pump Replacement Did you complete the repair? | -- | Go to Step 9 | -- |
8 | Replace the Instrument Cluster Assembly. Refer to Instrument Cluster Replacement Did you complete the repair? | -- | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you find and complete the repair? | -- | System OK | Go to Step 2 |
