GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Optra 🢒 Accessories 🢒 Keyless Entry 🢒 Diagnostic System Check - Remote Keyless Entry

Test Description

The numbers below refer to the step numbers on the diagnostic table.

  1. Lack of communication may be due to a partial malfunction of the serial data circuit or due to a total malfunction of the serial data circuit. The specified procedure will determine the particular condition.

Step

Action

Yes

No

1

Install a scan tool.

Does the scan tool power up?

Go to Step 2

Go to Scan Tool Does Not Power Up in Data Link Communications

2

  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communication with the remote control door lock receiver (RCDLR).

Does the scan tool communicate with the RCDLR?

Go to Step 3

Go to Scan Tool Does Not Communicate with Component in Data Link Communications

3

Select the ECM display DTCs function on the scan tool.

Does the scan tool display any DTCs?
    • Go to Diagnostic Trouble Code (DTC) List in Engine Controls - 1.6L
    • Go to Diagnostic Trouble Code (DTC) List in Engine Controls - 1.8L
    • Go to Diagnostic Trouble Code (DTC) List in Engine Controls - 2.0L

Go to Symptoms - Keyless Entry