GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2005 🢒 Optra 🢒 Transmission/Transaxle 🢒 Clutch 🢒 Clutch Concentric Actuator Cylinder Replacement

Removal Procedure

    Object Number: 1290070 Size: SH
  1. Remove the transaxle from the vehicle. Refer to Transmission Replacement in Manual Transmission - D16 or Transmission Replacement in Manual Transmission - D20.
  2. Remove the concentric actuator cylinder retaining bolts.
  3. Disconnect the concentric actuator cylinder pipe from the concentric actuator cylinder.

    4. Object Number: 1290071 Size: SH

    Important: When removing the bushing, do not remove it with excessive force.

  4. Remove the bushing from the concentric actuator cylinder pipe in the transaxle housing.
  5. Remove the concentric actuator cylinder pipe.

    6. Object Number: 1290073 Size: SH

    Important: For removal or installation, do not separate the oil seal fixing spring from the back side of the concentric actuator cylinder.

  6. Remove the O-ring and the concentric actuator cylinder.

Installation Procedure

    Object Number: 1290074 Size: SH
  1. Install the concentric actuator cylinder and the pipe.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. After installing the pipe screw provisionally, tighten the concentric actuator cylinder retaining bolts.

    3. Tighten
    Tighten the concentric actuator cylinder retaining bolts to 7 N·m (62 lb in).

  3. Tighten the pipe screw.

    4. Tighten
    Tighten the pipe screw to 15 N·m (11 lb ft).


    Object Number: 1290076 Size: SH
  4. Install the bushing onto the transaxle housing.
  5. Connect the pipe with bushing.
  6. Install the transaxle into the vehicle. Refer to Transmission Replacement in Manual Transmission - D16 or Transmission Replacement in Manual Transmission - D20.